Integrated Diagnostics to Boost Product Repairability

by Florent | Jan 12, 2026 | 0 comments

Failure Diagnosis Support : A KEY DRIVER OF REPAIRABILITY

In a context where the durability of industrial products is becoming both a regulatory and strategic imperative, failure diagnosis stands out as a key lever for improving repairability. Whether implemented through software interfaces, sensors, or self-diagnostic systems, it enables the rapid identification of the cause of a fault, guides technical intervention, and ensures optimised restoration to service.

But beyond its technical function, diagnosis determines a product’s ability to be maintained, upgraded, or reused – criteria now governed by standard NF EN 45554, which provides a framework for assessing the repairability of energy-related products.

Why Integrate Failure Diagnostics into Your Repairability Strategy?

Failure diagnostics are far more than just a technical support tool. They play a strategic role in reducing functional obsolescence and improving the maintainability of industrial products. Integrating diagnostics from the design stage encourages a preventive approach and optimises the product’s operational reliability throughout its lifecycle.

Reducing downtime costs in production equipment

In the industrial sector, equipment downtime is never inconsequential: it results in direct economic losses and jeopardises operational continuity. Whether on an assembly line, in a logistics setting or an automated production site, any undiagnosed fault can cost thousands of euros per hour.

An embedded diagnostic system enables proactive action: by pinpointing the exact nature of the fault — mechanical failure, electrical anomaly, disconnected sensor — it drastically reduces the time needed to locate the fault. The technician no longer works blindly: they target the intervention, use the correct parts, and restore the equipment to service as quickly as possible. This ability to minimise unplanned downtime:

  • reduces the cost of lost production;

  • avoids emergency call-out charges (after-sales or specialised technicians);

  • limits knock-on effects across the value chain.

Diagnosis thus becomes a strategic investment that strengthens operational resilience and the profitability of industrial assets.

Reducing equipment downtime to avoid everyday disruption

When a household appliance breaks down, it’s not just a technical issue — it’s a major disruption to daily life. A faulty washing machine means having to do laundry elsewhere, wasting time and money. A fridge failure in the middle of summer means immediate food loss and a repair emergency.

In such situations, diagnostic time is critical. The longer it takes, the greater the disruption, and the higher the indirect cost of the breakdown: spoiled food, emergency repair charges, or a rushed purchase of a replacement product.

A product equipped with an intuitive diagnostic system — error code, clear indicator light, or mobile detection app — allows the user or technician to:

  • instantly identify the root of the problem (e.g. blocked pump, improperly closed door, faulty electronic module);

  • make the right decision: self-repair, targeted call to after-sales with the correct part, or informed replacement;

  • minimise the impact on daily life and avoid unexpected expenses.

Additionally, a well-designed diagnostic system allows technical support centres to carry out remote pre-diagnoses, or even assist the user via video call to resolve the issue. This paves the way for faster, more targeted, and often less costly interventions. In some cases, the repair can be performed without any travel, reducing both logistical costs and the environmental footprint of the service.

Optimising maintenance operations

In industrial environments as well as professional technical services, the efficiency of maintenance operations is directly linked to the quality of the failure diagnosis. The more precise the diagnosis, the more targeted, rapid and cost-effective the intervention.

An embedded diagnostic system provides access to real-time or historical data on equipment operation: abnormal behaviours, disrupted cycles, early warning signals of failure. This information is essential for guiding technicians in their decision-making and enables them to:

  • prepare the intervention in advance, with the right tools and spare parts;

  • reduce on-site intervention time (exposure time, resource mobilisation);

  • avoid mishandling caused by imprecise diagnostics.

This not only improves the productivity of maintenance teams, but also the quality of repairs and the residual service life of equipment.

In an ecodesign framework, this approach helps prevent premature replacement by extending the useful life of products through optimised maintenance. It aligns with repairability goals, waste reduction, and the control of operating costs.

Improving intervention safety and equipment reliability

Failure diagnosis support is not just about guiding the technician. It also acts as a safeguard for the product itself by detecting abnormal usage conditions or risk situations that could lead to premature degradation.

Take the example of an electric motor fitted with an integrated current sensor: in the event of mechanical overload or a blocked shaft, abnormal power consumption is detected. The system can then trigger an automatic safety shutdown, preventing overheating and winding damage. The diagnostic system then alerts the user or technician to the precise nature of the anomaly (e.g. overload, obstruction, abnormal wear).

This approach makes it possible to:

  • prevent breakage before it actually occurs;

  • reduce destructive stress on sensitive components;

  • extend equipment lifespan by acting before critical failures arise.

Moreover, these systems reduce the risks associated with trial-and-error repairs: users or repairers are alerted to abnormal behaviour and can intervene in a guided, safe manner. This level of information supports maintenance practices that preserve product integrity while limiting risks to the operator.

What the NF EN 45554 standard says about diagnostic support

The NF EN 45554 standard provides a methodological framework for assessing the repairability, reusability, and upgradability of energy-related products. It is now a key reference for manufacturers and design offices involved in ecodesign or regulatory compliance initiatives (Ecodesign Directive, French AGEC Law, etc.).

Diagnostic support is identified as a determining factor for repairability, alongside other aspects such as component accessibility, spare parts availability, or the provision of technical documentation.

Evaluation criteria for diagnostics in the EN 45554 standard

The NF EN 45554 standard does more than acknowledge diagnostic support as a repairability lever; it also defines how it should be assessed. The objective is to determine how effectively the diagnostic system facilitates the identification and resolution of failures.

The criteria cover several aspects:

Presence and functionality of the system

  • Is the product equipped with an embedded diagnostic system?

  • Can it detect, record, and communicate faults?

  • Is there a user or professional interface for accessing diagnostics?

Accessibility of diagnostics

  • Can the system be used without special tools?

  • Is it understandable by non-expert users?

  • Is access restricted to certain professionals (authorised service centres, certified technicians)?

Precision and guidance of diagnostics

  • Does the system allow fast and clear identification of the fault's root cause?

  • Are error messages explicit (standardised codes, textual messages, icons)?

  • Is there a link between the diagnostic and a guided repair procedure (e.g. manual, app, online platform)?

Level of automation

  • Does the product offer self-diagnosis?

  • Are diagnostic data logged (for future consultation)?

  • Is there an alert or automatic notification system (e.g. indicator light, on-screen message, mobile app alert)?

Interoperability with other tools

  • Can the diagnostic system be integrated into a CMMS (computerised maintenance management system)?

  • Is it compatible with open communication standards?

All these elements contribute to assigning a performance level to the diagnostic system, which in turn influences the overall repairability score during an audit based on the standard.

Diagnostic interfaces: open vs proprietary

When assessing a product’s repairability, the nature of the diagnostic interface plays a crucial role. The NF EN 45554 standard specifically highlights the differences in accessibility and impact between so-called open interfaces and those classified as proprietary.

Open interfaces: a lever for accessibility

An open interface is based on standardised or widely documented protocols, accessible to all stakeholders — manufacturers, independent repairers, informed consumers. This type of system allows for:

  • compatibility with standard diagnostic tools (e.g. OBD II in the automotive sector);

  • easy access to technical information without restrictive conditions;

  • rapid and effective interventions by unauthorised technicians.

These interfaces support the democratisation of repair, reduce brand dependency, and fully align with the objectives of the right to repair.

Proprietary interfaces: a technical lock-in

Conversely, some interfaces are deliberately restricted to specific service networks. Access to diagnostics may be conditioned by:

  • proprietary software unavailable to the general public;

  • specific tools (electronic keys, dongles, closed licences);

  • or exclusive training reserved for authorised technicians.

This type of lock-in hinders, or even prevents, repairs by qualified independent operators. It limits the product’s real-world repairability — even if technically repairable — and may lead to organisational or commercial obsolescence.

A strategic issue for manufacturers

The choice between an open or proprietary interface is not a neutral one: it affects the perceived value of the product, its long-term usability, and compliance with regulatory expectations. Manufacturers committed to ecodesign — or aiming to meet the requirements of the repairability index or future durability index — have every interest in favouring interfaces that are transparent, well-documented, and accessible.

Integrating diagnostics from the design phase

In a repair-oriented design approach, diagnostic support should not be treated as a late-stage add-on, but rather as an integrated function from the earliest stages of product development. Anticipating this integration makes it possible to meet the requirements of NF EN 45554, while aligning the product with ecodesign and circular economy principles.

Identifying critical points from the design stage

This involves analysing potential failure modes using tools such as FMEA (Failure Modes and Effects Analysis) or fault tree analysis. This makes it possible to:

  • target sensitive components (motors, sensors, electronic boards);

  • anticipate scenarios of wear or overload;

  • define appropriate diagnostic mechanisms accordingly.

Defining functional requirements for diagnostics

Once the risks are identified, designers can specify the necessary interfaces, sensors, and communication protocols to ensure a reliable, fast, and usable diagnostic system, including:

  • the choice of relevant fault indicators;

  • the type of alerts (visual, audible, digital);

  • compatibility with existing diagnostic tools (interoperability).

Positioning diagnostics as a reliability function

Rather than viewing it as a cost, diagnostics should be seen as a reliability feature. It protects components during actual use, provides alerts in the event of anomalies, and enables targeted preventive interventions — limiting equipment degradation. As such, it becomes a technical and environmental differentiator, including in tenders or public procurement processes that value product durability.

By integrating it at the design stage, diagnostics becomes both a performance driver and a key factor in repairability.

Concrete examples of embedded diagnostic systems

To better understand the diversity of failure diagnostic support systems, it is essential to examine how they are implemented across various industrial sectors. These examples show how manufacturers integrate this function both as a maintenance tool, a lever for repairability, and a guarantee of product reliability.

Visual error codes on industrial printers

Professional printers (office or industrial) are often equipped with error code systems accessible via a screen or LED. These messages direct the user to the source of the fault: paper jam, unrecognised cartridge, clogged print head, etc.

This type of autonomous diagnostic, combined with a visual or digital guide, enables immediate self-repair or better preparation for technical intervention.

Vibration analysis on motors and pumps

In mechanical industries, vibration monitoring systems detect anomalies well before a breakdown occurs: imbalance, excessive play, bearing wear, etc.

These built-in sensors, coupled with signal processing algorithms, offer valuable predictive diagnostics to plan preventive maintenance or avoid the failure of a critical component.

OBD systems in the automotive sector

The OBD (On-Board Diagnostic) interface is a standard in the automotive industry. It enables faults to be read via a universal connector and errors (Pxxx codes) to be interpreted using compatible software.

Accessible to both mechanics and informed users, this interface enhances vehicle repairability and technical transparency. It is often cited as a benchmark for open interfaces in the EN 45554 standard.

Software interfaces in CNC machines

In manufacturing or additive industries, CNC (Computer Numerical Control) machines integrate onboard diagnostics accessible via the operator interface. These modules identify axis errors, lubrication faults, or mechanical overloads.

Operators can access error histories, launch test sequences, or contact a technician remotely using the same software.

Maintenance alerts via IoT sensors

An increasing number of devices (compressors, air conditioners, connected appliances) are equipped with smart sensors (temperature, pressure, current…) linked to a mobile app or cloud platform. When an anomaly is detected, a real-time alert is sent to the user or the after-sales service.

This setup enables remote, reactive maintenance, reduces unnecessary trips, and improves data use for predictive maintenance.

Automatic diagnostics on washing machines

Many washing machines feature diagnostic systems that signal common faults: load imbalance, blocked pump, clogged filter, water inlet issue. These are displayed via error codes or indicator lights. Some models even allow reading via a mobile app, facilitating self-troubleshooting or pre-diagnosis before intervention.

Refrigerators with temperature and fault alerts

Modern fridges include temperature, humidity, and door-opening sensors. In case of an issue (motor overheating, cooling loss, sensor failure), the appliance triggers a visual or audible alert — sometimes also sent to a smartphone app. This helps react quickly, avoid food loss, and provide precise information to customer service.

Food processors with clear error codes

Multifunction kitchen robots like the Thermomix or Magimix Cook Expert have touchscreen digital interfaces capable of displaying diagnostic messages in case of overheating, motor failure, or bowl-locking issues. The user is guided towards an immediate solution or contacts after-sales support with the correct technical information.

Connected power tools

Some professional or consumer tool brands (like Bosch or Milwaukee) offer smart batteries or motors that signal overload, excessive temperature, or contact failure. Via mobile apps or diagnostic LEDs, the user is alerted in real time to prevent premature wear or motor damage.

Electric vehicles and scooters with connected diagnostics

Soft mobility vehicles (e-bikes, scooters, electric mopeds) often include onboard digital diagnostic systems. Users can access information about battery status, controller errors, or braking anomalies via a dedicated app. This diagnostic can be shared directly with a technician, making remote or in-shop repair easier.

Best practices for integrating diagnostics at the product design stage

Integrating failure diagnosis support should not be considered a secondary feature added at the end of development. It must be an integral part of the product design process, alongside safety, performance, and user experience. Below are key best practices for designing a repairable, reliable, and maintainable product.

Identify critical failures

The first step in implementing effective diagnostic support is to locate and prioritise potential failure points. This foundational analysis informs all subsequent decisions: choice of sensors, type of alerts, interface architecture, and associated maintenance strategy.

Use failure analysis tools

Several methods are recommended from the design phase:

  • FMEA (Failure Modes and Effects Analysis): helps assess the probability, severity and detectability of a defect to estimate its criticality;

  • Fault tree analysis: useful for modelling complex cascading failure scenarios;

  • Feedback from after-sales or field use: essential to complement theoretical analysis with real-world product data.

Locate sensitive functions to be monitored

Special attention should be paid to control, safety and wear-prone components:

  • motors, pumps, and electromechanical parts subject to repeated stress;

  • electronic components sensitive to temperature or humidity;

  • mechanical interfaces (hinges, latches, connectors) exposed to accelerated wear.

Identify early signs of degradation

Effective diagnostics don’t just detect actual breakdowns — they also monitor behavioural deviations such as:

  • declining performance;

  • increased cycle times;

  • abnormal noise, overconsumption, overheating.

These symptoms are early indicators of a critical failure and must be detectable through measurable parameters.

By identifying these critical points, designers can specify where and how to equip the product with diagnostic features to anticipate failure rather than endure it. This forms the foundation of a smart diagnostic and predictive maintenance strategy.

Selecting the right sensors and interfaces

Once critical failures have been identified, it is essential to choose appropriate measurement devices to collect relevant data. This selection must be functional, reliable, and proportionate to the product’s actual use and environment.

Choose the right sensors based on parameters to monitor

The choice of sensor depends on the type of degradation to detect:

  • Temperature sensor: ideal for preventing motor overheating, electronic component failure, or operation outside acceptable ranges;

  • Current sensor (shunt, Hall effect): useful for identifying motor overload, mechanical blockage or short-circuit;

  • Pressure / flow sensor: used in hydraulic systems, ventilation or water circuits to detect pressure drops or clogging;

  • Vibration sensor / accelerometer: effective for identifying mechanical anomalies (imbalance, misalignment, faulty bearings);

  • Humidity or moisture sensor: relevant for products exposed to damp or outdoor environments (tools, appliances, home automation).

Sensors must be strategically positioned, properly calibrated, and capable of delivering interpretable data for diagnostic purposes.

Define a suitable user interface

The diagnostic interface must be tailored to the end user and the acceptable level of complexity:

  • For the general public: simple indicator lights, LCD screens with error messages, easily interpretable colour codes;

  • For professionals: access to detailed technical parameters via an advanced menu or dedicated mobile interface;

  • For after-sales technicians: diagnostic connector (e.g. OBD, USB, Bluetooth) and remote software access with event history.

The goal is to clearly guide the user or repairer to the nature of the fault without causing confusion or misinterpretation.

Favour scalability and robustness

Finally, it is recommended to:

  • standardise components (common sensors, open communication protocols) to facilitate repair and replacement;

  • ensure a robust interface (sealed, mechanically resistant) suited to the product’s environment;

  • design a modular architecture that can evolve with future software or hardware updates.

A well-chosen sensor and interface system enables long-term diagnostics that remain usable throughout the product’s life cycle, including during support and maintenance phases.

Adapting complexity to the user profile (expert, generalist, manufacturer)

Not all products have the same end users. It is therefore essential to adapt the level of diagnostic complexity to their needs and capabilities:

  • For the general public: simple, clear, visual messages, or a mobile app with built-in guidance;

  • For independent repairers: a standardised or open interface, with access to error histories and critical parameters;

  • For manufacturer after-sales services: a proprietary diagnostic tool, but comprehensive, enabling precise diagnosis in the workshop or remotely.

This personalisation of diagnostics based on user profile is key to ensuring effective repairability — and also enhances customer satisfaction.

Which diagnostic interfaces should you choose?

The NF EN 45554 standard categorises diagnostic interfaces into five classes, based on their level of accessibility, transparency, and standardisation. This classification helps assess how open a product is to repair — whether by the end user, an independent repairer, or an authorised service provider.

The 5 classes according to the EN 45554 standard

  • Class A: Intuitive interface
    Direct signalling via LED, pictogram, indicator light
    Examples: blinking LED, simple error icon

  • Class B: Code with public reference table
    Error code displayed + interpretation table publicly accessible
    Examples: "E5", "F21" with printed or online manual

  • Class C: Public hardware/software interface
    Access via a port or mobile app, documented and usable without restriction
    Examples: USB-C port, dedicated smartphone app, integrated diagnostic menu

  • Class D: Proprietary interface
    Access restricted by the manufacturer, requiring specific non-public tool or software
    Examples: dedicated dongle, licensed software

  • Class E: No interface
    No diagnostic means available to the user or repairer
    Examples: products with no display, code or communication port

Tip: aim for at least Class C, with a standard port (USB-C, RJ45) and freely accessible documentation.

Failure diagnosis and predictive maintenance: a winning synergy

As part of ecodesign and product life extension strategies, combining embedded diagnostics with predictive maintenance proves to be a complementary and high-performing approach. Together, these two levers not only enable faster repairs, but also help prevent failures before they occur.

Real-time data collection for predictive analysis

An embedded diagnostic system can be designed to continuously record usage and operating data, such as:

  • usage cycles, activity durations, frequency of activation;

  • temperature, electrical current, pressure, vibrations;

  • past anomalies or unusual behaviours (accelerated wear, recurring errors).

These data, stored locally or transmitted via a connected platform (cloud, app), become health indicators for the product, which can be used to anticipate imminent failures.

Using AI to anticipate failures

By cross-referencing diagnostic data with reference models or failure histories, it is possible to use artificial intelligence or machine learning algorithms to:

  • detect gradual drifts invisible to the naked eye;

  • define personalised alert thresholds based on real usage environments;

  • predict the optimal time for intervention — before breakdown or critical failure.

This "condition monitoring" or predictive maintenance approach is already widely used in the automotive and industrial sectors, as well as in certain connected consumer products.

Towards more proactive, sustainable and cost-effective maintenance

By combining embedded diagnostics with predictive analysis, manufacturers and users can:

  • avoid disruptive breakdowns by scheduling interventions in advance;

  • reduce the costs of corrective maintenance and unnecessary replacements;

  • extend the product's service life by keeping it in optimal operating condition.

For manufacturers, this synergy is also a competitive differentiator, which can be promoted as part of CSR strategies, tender responses, or environmental certifications.

The influence of pricing strategy on diagnostic system integration

Integrating a failure diagnostic system into a manufactured product is not solely a technical matter — it is closely tied to economic trade-offs. A product’s market positioning — entry-level, mid-range, or premium — directly influences the level of sophistication and accessibility of the embedded diagnostics.

High-end products: comprehensive, automated diagnostics

Products in the premium segment generally incorporate highly developed diagnostic systems, including:

  • multiple and redundant sensors (temperature, current, vibrations, etc.);

  • a connected or touchscreen digital interface;

  • self-diagnostics with clear messages, fault histories, and real-time alerts.

These solutions support assisted or even automated maintenance, reinforce perceived product value, and reduce after-sales costs for the manufacturer. They also serve as a strong marketing argument for customers concerned with reliability and repairability.

Making diagnostics accessible without increasing costs

In the mid-range segment, manufacturers must balance tight budgets with rising expectations around repairability. Integrating a simple yet effective diagnostic system can be a competitive advantage, if well designed.

These products often adopt streamlined but smart solutions:

  • multi-function indicator lights signalling various types of faults (overheating, motor failure, sensor anomaly);

  • segment displays showing standardised error codes;

  • simplified mobile apps offering a pre-diagnosis based on declared symptoms (e.g. noise, sudden stop, ignition failure).

The aim is to enable users to:

  • identify the nature of the fault without immediate professional help;

  • avoid handling errors or inappropriate repair attempts;

  • ease communication with after-sales support before the intervention.

These solutions are low-cost to implement but offer high user value, especially in terms of reducing return rates, after-sales handling time, and improving customer satisfaction.

Low-cost products: often without embedded diagnostics

In budget ranges or for products perceived to have a short lifespan, diagnostic systems are often absent or very basic (power light, automatic shutdown in case of overload).

However, this economic choice comes with significant drawbacks:

  • difficulty understanding or anticipating faults;

  • full dependence on after-sales support for any malfunction;

  • risk of early disposal due to lack of simple repair solutions.

The absence of diagnostics can hinder real-world repairability — and therefore product durability.

Balancing design cost, after-sales service, and user value

Integrating a diagnostic system into a product should not be seen merely as an added expense, but rather as a strategic investment. This decision impacts the entire value chain: from design and usage to after-sales service.

Design cost: a controllable and scalable investment

Adding a sensor, developing an interface, or integrating a communication protocol generates an additional cost — but this can be controlled if anticipated early on. The cost will vary depending on:

  • the desired level of sophistication (basic visual diagnostic vs. intelligent self-diagnosis);

  • the possibility of pooling with other product functions;

  • the software complexity and integration environment (connected or not).

A well-calibrated diagnostic system can minimise this cost while meeting reliability and repairability objectives.

After-sales cost: a major profitability lever

An effective diagnostic system reduces:

  • unnecessary or incorrect interventions;

  • technician time on-site or on the phone;

  • wrongly replaced parts, or costly full-unit exchanges.

For manufacturers, this translates into lower after-sales costs and better control over product return rates — improving both margins and brand image.

User value: extending product life and fostering loyalty

From the user’s point of view, a product capable of self-diagnosis or guiding repairs is seen as more reliable, transparent, and durable. It helps to:

  • build trust in the brand;

  • increase product value compared to competitors;

  • reduce perceived obsolescence, and thus increase product retention.

Ultimately, a well-balanced approach between development cost, after-sales support, and user experience can turn a regulatory constraint into a commercial opportunity.

Industrial and regulatory benefits of a good diagnostic system

Beyond its functional role, a well-designed failure diagnostic system is a true strategic asset for manufacturers. It contributes to product performance, operational cost reduction, customer satisfaction, and regulatory compliance. It is a central tool for responsible design and circular economy initiatives.

Extending product lifespan

An effective diagnostic system significantly extends the useful life of manufactured products. By detecting early signs of degradation, guiding repairs, and reducing intervention errors, it helps prevent premature replacements or unnecessary disposal.

This increased longevity is not just an economic or functional benefit — it also represents a powerful environmental lever. Each product kept in service longer means:

  • one less product manufactured (and fewer raw materials extracted);

  • one less transport operation — both for distribution and end-of-life management;

  • reduced end-of-life impact (less waste, less treatment required).

Concretely, extending a product’s lifespan by one to three years can reduce its annual carbon footprint by up to 30 to 40%, according to comparative life cycle assessments (LCAs).

In this context, diagnostic support becomes a key technological component of carbon-conscious strategies. It aligns industrial performance, cost control, environmental responsibility, and regulatory compliance (e.g. national low-carbon strategies, Scope 3 targets for companies).

Reducing maintenance and after-sales service costs

One of the most tangible benefits of effective diagnostic support lies in lowering the direct and indirect costs linked to maintenance and after-sales service. By providing reliable information on the product’s condition, diagnostics help optimise the entire fault resolution process — from pre-diagnosis to on-site intervention.

Fewer unnecessary interventions

A well-designed diagnostic system helps quickly rule out false alarms, avoid misdiagnosis, and guide the user toward a simple solution — often without needing technical assistance. The result: fewer on-site visits, with immediate savings in time and cost.

Fewer parts consumed, less waste

By guiding technicians to the exact part to be replaced, diagnostics help avoid unnecessary disassembly or full module replacements for minor issues, thereby reducing:

  • spare part costs,

  • raw material consumption,

  • waste from excessive or inappropriate repairs.

Fewer trips, lower carbon footprint

Diagnostics that can be shared remotely (via app, technical portal or hotline) enable:

  • better preparation for interventions with accurate parts and information;

  • avoiding round trips by technicians just for basic diagnostics;

  • sometimes solving the issue entirely remotely (via video assistance or targeted part delivery).

Each avoided trip directly cuts the carbon footprint of after-sales operations. This contributes to greener maintenance practices, aligned with service decarbonisation goals and Scope 3 emissions accounting.

More profitable and responsible maintenance

For manufacturers and operators, this creates a dual benefit: lower operational costs and a strategy aligned with CSR commitments. Embedded diagnostics thus become a driver of economic and environmental performance — fully integrated into sustainable repairability objectives.

Compliance with regulatory requirements (AGEC, Ecodesign, etc.)

Diagnostic systems are fully aligned with the core objectives of major European and French regulations, such as:

  • The Ecodesign Directive, which imposes repairability criteria and information access for repairers;

  • The French AGEC Law (Anti-Waste for a Circular Economy), which encourages the design of repairable products and the provision of consumer information;

  • The Repairability Index (and soon the Durability Index), which reward products with accessible and transparent diagnostics.

Implementing a robust diagnostic system means anticipating legal obligations, securing product offerings, and strengthening competitiveness in public procurement or tenders with strong environmental requirements.

Take action: assess or design your products with integrated failure diagnostics

Whether you're a manufacturer, design office, or product manager, integrating a failure diagnostic system should no longer be optional — it’s a functional, environmental, and regulatory requirement.

With evolving standards, shifting market expectations, and increasing sustainability obligations, mastering this aspect from the design stage — or re-evaluating your existing ranges in light of these new criteria — is essential.

Contact our experts to audit your products in accordance with NF EN 45554

Our engineers and repairability specialists can support you in:

  • conducting a full audit of your products based on the NF EN 45554 standard;

  • identifying diagnostic-related bottlenecks (lack of fault indicators, closed interfaces, missing critical sensors, etc.);

  • formulating realistic technical recommendations tailored to your sector and development budget.

The objective: help you raise the repairability level of your products, optimise after-sales costs, and meet your customers’ growing expectations.

Subscribe to our newsletter on ecodesign and repairability

Stay up to date with regulatory news, case studies, and practical guides on:

  • applicable standards (Ecodesign, AGEC, upcoming Durability Index);

  • best practices in integrated diagnostics and user interface design;

  • innovations in predictive maintenance and product circularity.

Join a community of professionals committed to a more sustainable, smarter, and more repairable industry.